Driving Head As Grounding Rod

Specification of Driving Head As Grounding Rod

Driving the head or the project person, the impact bearing wood is a tool used for the needs of the grounding system, to be precise for the grounding rod. This driving functions as a collision to deepen as a grounding rod or copper stick into the ground. The advantage of using driving heat is that when the grounding is on the hammer / stick as the grounding is not broken, and also so that the top surface as grounding is not damaged. If the top surface is damaged, it will affect the resistance (ohms) to the ground.

A grounding impact bearing made of iron with a high carbon content, has a very hard logo. So that it is really tested will not damage the stick as a foundation. Here's how to install the driving head on the grounding system:

1. Prepare an earth rod whose side will be placed on top of the soil surface
2. Prepare the shock as a grounding / coupler and driver
3. Make sure the side of the stick is threaded
4. Put the end as a grounding rod that has been threaded into the coupler or shock
5. On the other side of the coupler, input the drive thread into the coupler
6. tighten the joints until they are completely tight
7. Driving ready to use

Specifications Driving Head As Grounding

• Made of iron material that is connected to carbon
• Available sizes 5/8 inch (diameter 14.5mm to 16mm) and 3/4 inch (diameter 18mm)
• Support with various couplers
• Easy to install
• Ready stock
• Prices can change at any time, the price of the driving head can be cheaper or it can be more expensive

Note: for exact prices please contact us

If you need driving sizes outside of specifications, We are ready to make according to your project specifications. Come on, consult your grounding project needs, get the best solutions and prices from CV. Lightning Protection Wijaya.