Specification of Arrester Phoenix 1 Pharse + N
designation: surge arrester, waster, shock catcher
- Brand: Phoenix Type: 1 Phares + 1 Neutral
- Country of origin: Germany
Dimension VAL-MS 230 ST
- Height: 52.4 mm
- Width: 17.5 mm
- Depth: 55.3 mm
- Horizontal pitch: 1 Div.
Ambient conditions
- Degree of protection: IP20
- Ambient temperature (operation): -40 ° C ... 80 ° C
- Ambient temperature (storage / transport): -40 ° C ... 80 ° C
- Altitude: ≤ 2000 m (amsl (above mean sea level))
- Permissible humidity (operation): 5% ... 95%
- Shock (operation): 25g (Half-sine / 11 ms / 3x ± X, ± Y, ± Z)
- Vibration (operation): 5g (10 ... 500 Hz / 2.5 h / X, Y, Z)
General
- IEC test classification: II, T2
- EN type: T2
- IEC power supply system: TN, TT
- Mode of protection: L-N, L-PEN
- Mounting type: on base element
- Color: jet black RAL 9005
- Housing material: PA 6.6
- Degree of pollution: 2
- Flammability rating according to UL 94: V-0
- Type: DIN rail module, two-section, divisible
- Number of positions: 1
- Arrester can be tested with CHECKMASTER from software version: From SW rev. 1.10
- Surge protection fault message: optical
Protective circuit
- Nominal voltage UN: 240/415 V AC (TN), 240/415 V AC (TT)
- Nominal frequency fN: 50 Hz (60 Hz)
- Maximum continuous voltage UC: 275 V AC
- Residual current IPE: ≤ 0.45 mA
- Standby power consumption PC: ≤ 120 mVA
- Nominal discharge current In (8/20) µs 20 kA
- Maximum discharge current Imax (8/20) µs 40 kA
- Short-circuit current rating of ISCCR 25 kA
- Voltage protection level Up ≤ 1.35 kV
- Residual voltage Ures ≤ 1.35 kV (at In), ≤ 1.1 kV (at 10 kA), ≤ 1 kV (at 5 kA), ≤ 0.9 kV (at 3 kA),
- TOV behavior at UT: 335 V AC (5 s / withstand mode), 440 V AC (120 min / safe failure mode)
- Response time tA: ≤ 25 ns
Max. backup fuse with branch wiring: 125 A (gG)
Data connection
- Connection method: pluggable
Standards and Regulations
- Standards / regulations of IEC 61643-11 2011, EN 61643-11 2012
UL specifications
- SPD Type: 4CA
- Maximum continuous operating voltage MCOV (L-N): 275 V AC
- Nom. voltage: 230V AC
- Mode of protection: L-N
- Power distribution system: Single phase
- Nominal frequency: 50/60 Hz
- Measured limiting voltage MLV (L-N): 1910 V
- Nominal discharge current In (L-N): 20 kA
USES OF ARRESTER
Surge arrester is an electrical device that is used to neutralize excess electricity, so it is not dangerous for electric devices or other electrical components. Excess electricity can occur due to lightning strikes, short / stress on the cable, power failure on the mains current.
SELL PHOENIX ARRESTER SURGE
Wijaya Lightning Protection as a specialist for lightning protection and grounding systems sells electrical installation equipment such as selling surge arresters phoenix. For the phoenix brand product arrester WLP sells all kinds of types such as Surge Arrester Phoenix 1Pharse + F-MS with stock status of ready, original, and new item condition.
Do you want to consult with a grounding system or lightning rod? Feel free to discuss. We will provide the best solution for your grounding system or lightning rod. You only need to contact us at the number listed.
Regards,
Wijaya Lightning Protection
Jl. Salemba Raya, Pasar Kenari Lama Blok AL.01 Aks 169 Lantai 1 Pusat Jakarta, 10430, Jakarta Pusat 10430
DKI Jakarta, Indonesia
Call / WA: 081213547353
